Creating Connectors ​

Thanks for your interest in adding a new connector to Wagmi! Please take a moment to review this document before starting work on a new connector.

Overview ​

This guide details how to create new connectors and upstream them back into Wagmi. By following these steps, you will understand the development process, workflow, and requirements for new connectors. Not all connectors will be accepted into Wagmi for a variety of reasons outlined in this document.

In addition, for connector requests to be accepted, the team creating the connector must sponsor Wagmi. It takes time and effort to maintain third-party connectors. Wagmi is an OSS project that depends on sponsors and grants to continue our work. Please get in touch via dev@wevm.dev if you have questions about sponsoring.

1. Follow the contributing guide ​

Check out the Contributing Guide to get your local development environment set up and learn more about the contributing workflow.

2. Create a new file for the connector ​

Create a new file in packages/connector/src named after the connector you want to add.

For example, if you want to add Foo, you would create a file named foo.ts. File names should be camel-cased and as short as possible.

3. Create the connector object. ​

Import createConnector from @wagmi/core and export a new function that accepts a parameters object and returns the createConnector result. This is the base of all connectors. The name of the connector name should be the same as the file name.

import { createConnector } from '@wagmi/core'

export type FooBarBazParameters = {}

export function fooBarBaz(parameters: FooBarBazParameters = {}) {
  return createConnector((config) => ({}))
}

import { createConnector } from '@wagmi/core'

export type FooBarBazParameters = {}

export function fooBarBaz(parameters: FooBarBazParameters = {}) {
  return createConnector((config) => ({}))
}

4. Add the missing properties to the object ​

Now that the base of the connector is set up, you should see a type error that looks something like this:

ts
createConnector((config) => ({}))
Type '{}' is missing the following properties from type '{ readonly icon?: string | undefined; readonly id: string; readonly name: string; readonly supportsSimulation?: boolean | undefined; readonly type: string; setup?: (() => Promise<void>) | undefined; ... 12 more ...; onMessage?: ((message: ProviderMessage) => void) | undefined; }': id, name, type, connect, and 8 more.2740Type '{}' is missing the following properties from type '{ readonly icon?: string | undefined; readonly id: string; readonly name: string; readonly supportsSimulation?: boolean | undefined; readonly type: string; setup?: (() => Promise<void>) | undefined; ... 12 more ...; onMessage?: ((message: ProviderMessage) => void) | undefined; }': id, name, type, connect, and 8 more.

ts
createConnector((config) => ({}))
Type '{}' is missing the following properties from type '{ readonly icon?: string | undefined; readonly id: string; readonly name: string; readonly supportsSimulation?: boolean | undefined; readonly type: string; setup?: (() => Promise<void>) | undefined; ... 12 more ...; onMessage?: ((message: ProviderMessage) => void) | undefined; }': id, name, type, connect, and 8 more.2740Type '{}' is missing the following properties from type '{ readonly icon?: string | undefined; readonly id: string; readonly name: string; readonly supportsSimulation?: boolean | undefined; readonly type: string; setup?: (() => Promise<void>) | undefined; ... 12 more ...; onMessage?: ((message: ProviderMessage) => void) | undefined; }': id, name, type, connect, and 8 more.

The type error tells you what properties are missing from createConnector's return type. Add them all in!

Properties ​

• icon: Optional icon URL for the connector.
• id: The ID for the connector. This should be camel-cased and as short as possible. Example: fooBarBaz.
• name: Human-readable name for the connector. Example: 'Foo Bar Baz'.
• supportsSimulation: Whether the connector supports contract simulation. This should be disabled if a connector's wallet cannot accurately simulate contract writes or display contract revert messages. Defaults to false.

Methods ​

• connect: Function for connecting the connector.
• disconnect: Function for disconnecting the connector.
• getAccounts: Function that returns the connected accounts for the connector.
• getChainId: Function that returns the connected chain ID for the connector.
• getProvider: Function that returns the underlying provider interface for internal use throughout the connector.
• isAuthorized: Function that returns whether the connector has connected previously and is still authorized.
• setup: Optional function for running when the connector is first created.
• switchChain: Optional function for switching the connector's active chain.

Events ​

• onAccountsChanged: Function for subscribing to account changes internally in the connector.
• onChainChanged: Function for subscribing to chain changes internally in the connector.
• onConnect: Function for subscribing to connection events internally in the connector.
• onDisconnect: Function for subscribing to disconnection events internally in the connector.
• onMessage: Optional function for subscribing to messages internally in the connector.

Parameters ​

createConnector also has the following config properties you can use within the connector:

• chains: List of chains configured by the user.
• emitter: Emitter for emitting events. Used to sync connector state with Wagmi Config. The following events are available:
  • change: Emitted when the connected accounts or chain changes.
  • connect: Emitted when the connector connects.
  • disconnect: Emitted when the connector disconnects.
  • error: Emitted when the connector receives an error.
  • message: Emitted when the connector receives a message.
• storage: Optional storage configured by the user. Defaults to wrapper around localStorage.

5. Export the connector ​

Export the connector from packages/connector/src/exports/index.ts in alphabetic order.

export { fooBarBaz } from './fooBarBaz.js'

export { fooBarBaz } from './fooBarBaz.js'

6. Try out the connector and add tests ​

While building a connector, it can be useful to try it out with Wagmi. You can use the development playgrounds for testing your changes.

Ideally, you should also be able to add tests for the connector in a connectorName.test.ts file. This isn't always easy so at a minimum please create a test file with instructions for how to test the connector manually. The test file should include actual tests or "instruction tests" for the following:

• How to connect the connector.
• How to disconnect the connector.
• How to switch the connector's active chain (if applicable).

Remember to include all info required to test the connector, like software to install (browser extension, mobile app, etc.), smart contracts to interact with/deploy, etc.

Finally, you should also update the test file in packages/connectors/src/exports/index.test.ts to include the new connector. You can do this manually or by running:

pnpm test:update packages/connectors/src/exports/index.test.ts

pnpm test:update packages/connectors/src/exports/index.test.ts

7. Add your team to CODEOWNERS ​

It is critical that connectors are updated in a timely manner and actively maintained so that users of Wagmi can rely on them in production settings.

The Wagmi core team will provide as much assistance as possible to keep connectors up-to-date with breaking changes from Wagmi, but it is your responsibility to ensure that any dependencies and issues/discussions related to the connector are handled in a timely manner. If issues are not resolved in a timely manner, the connector may be removed from Wagmi.

In support of this goal, add at least one member of your team to the CODEOWNERS file so that you get notified of pull requests, issues, etc. related to the connector. You can add your team like this:

/packages/connectors/src/fooBarBaz @tmm @jxom

/packages/connectors/src/fooBarBaz @tmm @jxom

For more info about GitHub code owners, check out the GitHub Documentation.

8. Document the connector ​

The connector should be documented. Follow the step on writing documentation to get set up with running the docs site locally and add the required pages.

9. Create a changeset ​

Now that the connector works and has tests, it's time to create a changeset to prepare for release. Run the following to create a changeset:

pnpm changeset

pnpm changeset

The changeset should be a patch applied to the @wagmi/connectors repository with the description Added [ConnectorName], For example, Added Foo Bar Baz.

10. Create a pull request ​

The connector is ready to go! Create a pull request and the connector should make it into a future release of Wagmi after some review.